Introduction:
JIC Fitting is a selection of hydraulic fittings that's made in accordance to the SAE J514 requirements. The acronym JIC stands for Joint Industry Council. It's also known as the JIC thirty seven degrees flare fitting since it has a thirty seven degrees flare seating surface. These fittings are utilized exipure reviews On trustpilot (https://www.issaquahreporter.com/) oil hydraulic methods in fields which are numerous (gas delivery, fuel power program, shipbuilding, mobile hydraulic equipment, etc...). A JIC fitting system has 3 components that create a tubing assembly: installing, flare nut, and sleeve.

Material:
Materials used to fabricate JIC fittings are carbon steel as well as stainless steel SS316L.

Sizes:
JIC frame and flare nut are obtainable in outer diameter ("OD) sizes between 1/8" to 1 2". Sleeve has 2 specific reading measurements, metric size (mm) & inch exterior diameter ("OD). Sleeve size can be bought from 3mm to 50mm and 1/8" to 2". Fitting sizes are specified by the corresponding outside diameter of the tubing for the numerous kinds of tube ends.

Working Pressure:
The conventional working stress of the fittings ranges from 1000 to 5000 psi for different sizes & connections. The minimum burst pressure is 4 times the working strain. The JIC fittings should be in a position to withstand two times the working pressure for a period of one minute without leakage or failure.
Remember to take note that the pressure rating of an exact same fitting might vary when it's connected to various equipments.. For example, if a fitting with a minimal performing pressure is linked to a pipe, it is going to result in an overall much reduce functioning strain. In all cases, constantly take into account the lowest pressure as the maximum working pressure of the system.

How does a JIC fitting works: For tube connections, the assembly operation begins from the planning of the tube. For starters, the nut and sleeve are inserted onto the end of a tube. With all the usage of a flaring tool, form the end of the hose to thirty seven degrees. Next, tighten the nut by implementing a spanner till the nut is firm and also the sleeve grips upon the tube. If the fittings are bench assembled, the gripping actions can be driven by revolving the hose using a pair of scissors as the nut is pulled down. When the tube can not be rotated by hand, the sleeve has gripped onto the tube. If this occurs,, firm up the nut by switching it one full turn. This may vary slightly with some other tubing materials, but for basic practice, it is a great rule to go by.

Configurations of JIC Fitting: Commonly used connection sorts consist of: JIC/BSPP Male Connector, JIC/ NPT Male connector, JIC union, JIC/NPT Swivel Male Connector, JIC/BSPP Swivel Male Connector.

Brand of JIC Fittings:
HS Corporation is a Korean company specializing in JIC Fitting. Started in 1980, HS Corporation has more than 30 years of specialised knowledge in manufacturing fittings.